Cart 0

Transmitters

Silent Nano TX- STX

The Silent Nano Transmitter is a development of the original Nano now incorporating a control panel, robust broadcast standard connectors and silent cooling system. The absence of a cooling fan makes this TX ideally suited to noise sensitive environments such as film sets. It enables production teams to offer viewers stunning high definition images using H.264 encoding with ultra-low latency, in situations not previously possible due to equipment size and battery runtime constraints.

BNTX Broadcast Nano Transmitter

The BNTX Broadcast Nano Transmitter is a development of the original Nano now incorporating a control pane, robust broadcast standard connectors and forced cooling, providing much improved thermal performance. It enables production teams to offer viewers stunning high definition images using H.264 encoding with ultra-low latency, in situations not previously possible due to equipment size and battery runtime constraints.The small size and ultra-low power consumption make the Broadcast Nano Transmitter ideal for a range of uses from Point of View to body worn video applications.

 

Receivers


Epsilon Lite

Available in 1 RU and 2 RU form factor, the unrivalled RF performance of the Epsilon Lite is complemented by an extremely flexible decoding platform, with low-delay SD and HD MPEG2 and H.264 decoding ensuring compatibility with most third party encoders. An optional second decoder can be enabled, allowing two SD or HD signals to be decoded. Multiple output formats are offered with composite and SDI outputs in SD and HD-SDI including embedded audio.

Handheld Receiver- HHRX

Designed to provide a compact receive solution for portable applications as might be required for floor monitoring, Directors assist. Employing proven diversity receive technology coupled with an FPGA based H264 decoder.

 

Wireless Camera Control

Camera Control System

The Videosys Camera Control System (CCU) is comprised of three units, the Indoor Unit (IDU), Outdoor Unit (ODU) and Camera Receiver (RXSM-E). Our system provides an end to end solution from RCP to camera allowing operators to seamlessly control their camera settings no matter the location. Available in a ready to install system or a bespoke system if required.

Camera Control Indoor Unit – IDU

Videosys Camera Control Indoor Unit (CC IDU-E) has been designed to control up to 4 cameras from one unit. The IDU sits in the truck connected to the OCP’s and can use either legacy or have the option for full Ethernet control from the network, seamlessly allowing integration into an existing OCP network.

Camera Control Receiver

Videosys Camera Control Receiver (RXSM-E) is a compact Camera Control receiver and is perfect for camera operations in any situation. With a single cable to connect to the camera, red and green tally and compatibility with Sony,Grass Valley,Panasonic,Hitachi and Ikegami camera systems all from one unit.

Camera Control Outdoor Unit- ODU

Camera Control Outdoor Unit (ODU-E) is a one watt UHF transmitter that is used with the Videosys Indoor Unit (CCIDU-E) and Receive Unit (RXSM-E). This unit is splash proof and can be powered by either a 12v 4 pin XLR (not supplied).Connectors 3 Pin XLR for Data/TNC Antenna RF Output 10mw/100mw/1 watt selectable from IDU Frequency 403 – 473MHz (474MHhz option) Occupied Bandwidth 12.5KHz Data Input RS485/RS232. Interface OLED screen with function buttons Occupied Bandwidth 12.5KHz.

 

Accessories


Down Converters

Down Converter Barrel Gain Selectable (DCBGS). The selectable barrel down converter has optimum performance in all situations. It is easy to mount with magnetic, cable-tie and screw-hole fixings for maximum flexibility. LED indicator for gain (high/low/off). Powered from the receiver via co-axial cable (BNC/TNC) and connects to receiver via standard 75 cable.


Omni Antenna

Our Omni antennas are available in a range of frequency bands from 1.2GHz up to 7.5GHz and a choice of connectors, N Type, TNC, SMA and DIN 4.3/10. These antennas are ideal for radio camera RX and MESH transceiver projects and mobile cell/LTE sites.

Flexi Omni Antenna

Our Flex Omni is a long proven design available in a range of frequency bands from 1.2GHz up to 7.5GHz. We offer a choice of connectors, N Type, TNC, SMA and DIN 4.3/10. The RF performance is the same as the regular Omni, but with the added flexible stork, ideal for camera mounting or mobile ground vehicles be that COFDM,  MESH or cellular deployment. We offer both short and long flexible omni options.

Marketing by